we have a highly skilled team who are specialists in all areas of fabrication work. Including but not
limited to Marine, construction, agrieculture, civil.
We work with a wide range of metal including but not limited to;
Aluminium, Kunifer, Stainless
We have qualified weld procedures to standards such as ISO 15614-1, ISO 15614-2, AWS D1.1, NORSOK 101 and NORSOK 102.
All our Weld Procedures are 3rd party approved by Lloyds Register and DNV
We carry out a variety of tests on completed fabrications,
horizontal boring up tp 5 tonn in house
We carry out various types of surface preparation:
Steelwork is checked for surface defects, sharp edges and weld spatter, then fresh water washed and de-greased prior to all types of treatment. Adequate protection is then applied to any areas which do not require painting.
Manual Preparation to ST2
Abrasion with sandpaper/wire brushing (by hand) to provide a suitable key for paint applications using a surface tolerant primer.
Mechanical Preparation to ST3
Use of hand-held grinder/flapper wheel to provide a suitable key for paint applications using a surface tolerant primer.
Abrasive Blasting to Swedish Standard Sa2, Sa2.5 or Sa3
Blasting via manual means or automated wheelabrator, using a variety of abrasives including:
• Chilled Iron Grit / Copper Slag / Ball Shot – for use on Carbon Steel substrates.
• Garnet / Aluminium Oxide / Glass Bead – for use on Stainless Steels & Duplex substrates.
Blasting achieves a uniform profile suitable for the application of all coating types. It is also recommended in some specifications for the preparation of steelwork prior to Hot Dip Galvanising.
We carry out various types of protective coating, to a variety of specifications:
A variety of primers are available including:
• Weldable Pre-Fabrication Primer
• Standard Epoxy / Holding Primer
• Zinc Phosphate / MIO Pigmented Primer
• Zinc Dust Ethyl Silicate Primer
• Zinc Rich Primer
• *Surface Tolerant / Aluminium Pigmented Primer
• *Polyaspartic Primer / Finish (offering equivalent protection to a two-coat system in
moderately corrosive environments in a single-coat application)
Multiple Coat Epoxy Systems
Multiple coat systems with a variety of finishes (matt, eggshell, semi-gloss, high gloss etc) including:
• *Polyurethane / Modified Acrylic (excellent colour retention & resistance to UV exposure).
PACS undertake all types of tank cleaning including fresh water, ballast and oil tanks using a combination of professional cleaning techniques and specialist equipment. All confined spaces are tested for safe entry prior to works commencing by our in house ships chemists (call for a quote )
PACS have a dedicated wagon to take care of your transport needs
PAYLOAD 11 TONN
crane max load 15TONN